Fuzzy based PI Controller for Basis Weight Process in Paper Industry
Abstract
Keywords
Full Text:
PDFReferences
S.Vidhya, “Fuzzy based PI Controller for Basis Weight Process” in 2012 Int. Conf . Computing and Control Engineering,pp 157.
Continiously Controlling the Basis Weight of Paper by a Time Basis Weight Valve Position Signal, Document Type and Number:United States Patent
Anamika Bhatia, “Fuzzy Modeling and Control of Basis Weight of Paper using Simulink”, Proceedings of the 10th WSEAS International Conference on FUZZY SYSTEMS.
Ziegler, G. and Nichols, N.B,.Optimum settings for automatic controllers, Trans. ASME, 64, 1942.
M.B.B. Sharifian,R.Rahnavard and H.Delavari “Velocity Control of DC Motor Based Intelligent methods and Optimal Integral State FeedbackController” Internatonal Journal of Computer theory and engineering,vol.1,No.1,april 2009.
Neenu Thomas, Dr. P. Poongodi “Position Control of DC Motor Using Genetic Algorithm Based PID Controller”Proceedings of the World Congress on Engineering 2009 Vol II WCE 2009, July 1 - 3, 2009, London, U.K.
Astrom, K., and Hagglund,T.,”Revisiting the Ziegler-Nichols step response method for PID control,” J.Process Control, 14, 2004.
Asim ali khan,Nushkam rapal “Fuzzy pid controller:Design,Tuning and comparison with conventional PID controller” 1-4244-0457-6/06/$20 2006 IEEE
Wang X. G., Dumont G.A. & Davies M.S. Adaptive Basis Weight Control in Paper Machines. Second IEEE Conference on Control applications, Vancouver, B.C., September 13-16, 1993.
B.Nagaraj, S.Subha, B.Rampriya “Tuning Algorithms for PID Controller Using Soft Computing Techniques” IJCSNS International Journal of Computer Science and Network Security, VOL.8 No.4, April 2008
Jan Jantzen: “Tuning of fuzzy PID controllers”Denmark.Tech. Report no 98- H 871(fpid), 30 Sep 1998.PP:1-22.
Kiam Heong Ang, Gregory Chong: “PID Control System Analysis, Design, and Technology” IEEE TRANSACTIONS ON CONTROL SYSTEMS TECHNOLOGY, VOL.13, No.4, July 2005 PP: 559-576.
G.Zhou and J.D.Birdwell, “Fuzzy logic- based PID autotuner design using simulated annealing”, in proceedings of the IEEE/IFAC joint symposium on computer-aided control system design pp.67-72, march 7-9,1994.
Kjaer A.P., Wellsted P.E. & Heath W.P. On-Line Sensing of Paper Machine Wet-End Properties: Dry-Line Detector. IEEE Transactions on Control Systems Technology, 5(6), 1997.
Pillay.N and Govender P.,” A particle Swarm Optimization Approach for model independent tuning of PID control loop”, IEEE African 2007, IEEE catalog: 04CH37590C, ISBN: 0-7803-8606,2007.
Ola Slätteke., Modeling and Control of the Paper Machine Drying Section, Licentiate thesis, ISRN LUTFD2/TFRT--1075--SE, Department of Automatic Control Lund University Lund, January 2006.
Nagaraj B. and Vijayakumar P. „Tuning of a PID controller using soft computing methodologies Applied to Basis Weight Control in Paper Machine‟. Journal of Korean Technical Association of Pulp and Paper Industry Vol. 43, No.3, 2011, pp1-10
Nagaraj B. and Murugananth R. „Optimum Tuning Algorithms for PID Controller - A Soft Computing Approach‟, International journal of Indian Pulp and Paper Technical Association. Vol.22, No.2, pg.127-129, April-June 2010
Yi Shen, Jian Qiu Zhang, Yan Wang, Zhoa Xim min, “ A New Sensor for Paper Basis Weight and Ash-content Measurement”, IEEE Transactions on Instrumentation and Measurements, Vol .46, No .4, 1997.
Khan, A.A.; Rapal, N, “Fuzzy PID Controller: Design, Tuning and Comparison with Conventional PID Controller”,IEEE International Conference on Engineering of Intelligent Systems, September 2006.
Tzafestas, S.; Papanikolopoulos, N.P.; “Incremental fuzzy expert PID control”,IEEE Transactions on Industrial Electronics, October 1990.
Lennart Ljung, “System identification: Theory for the User.
J.M. Herrero, X. Blasco,M. Martinez, J.V.Salcedo, “Optimal PID Tuning with Genetic Algorithm for nonlinear process models”,15th Triennial World Congress,Barcelona,Spain .
Rajani K. Mudi and Nikhil R. Pal, Member, IEEE, “A Robust Self-Tuning Scheme for PI- and PD-Type Fuzzy Controllers”, IEEE Transactions on Fuzzy Systems, Vol. 7, No. 1, February 1999.
Refbacks
- There are currently no refbacks.
This work is licensed under a Creative Commons Attribution 3.0 License.