Automatic Control of Hydraulic Machine using PLC
Abstract
Keywords
Full Text:
PDFReferences
Corsi.S, Pozzi.M, Sforna.M and Dell’Olio.G, “The coordinated automatic voltage control of the Italian transmission grid part II:control apparatuses and field performance of the consolidated hierarchical system,” IEEE Trans. Power Systems, vol. 19, no. 4, pp. 1733–1741, Nov. 2004.
Hashew.T.A, Schinstock.D.E and Waldrep.E.M, ““Two-phase on” drive operation in a permanent magnet synchronous machine electromechanical actuator,”IEEE Trans Energy Conversion, Vol. 14, No. 2, pp. 153-158, jun. 1999.
Kim.C.J and Chouikha.M.F, “Attenuation characteristics of high rate home-networking PLC signals,”IEEE Trans. Power Delivery, Vol. 17, No.4, pp. 945-950, Oct. 2002.
Bakken.B.H and Grande.O.S, “Automatic generation control in a deregulated power,”IEEE Trans. Power Systems, Vol. 13, No. 4, pp. 1401-1406, Nov. 1998.
Green.R.K, “Transformed automatic generation control,” IEEE Trans. Power Systems, Vol. 11, N0. 4, pp. 1799-1804, Nov. 1996.
“User manual for PLC programming with CodeSys 2.3”, Smart Software Solutions for GmbH.
Doe fundamentals handbook, “Instrumentation and Control volume 2 of 2”, U.S. department of Washington, D.C.20585.
Hugh Jack, Automatic manufacturing systems with PLCs, Version 5, May 4, 2007.
“Ladder logic fundamentals”, Industrial control system fall, 2006.
John R.Hackworth and Frederick D.Hackworth,Jr., Programmable Logic Controllers:Programming methods and applications, Jan 2003.
Situ Zhong, Wang Dazhi and Li Qingliang “Research of the application of intelligent fuzzy control in high rate hydraulic machine,” Proceedings of the 3rd world congress on intelligent control and automation, Vol. 1, 2000.
Tang.P.L and De Silva.C.W “Ethernet based predictive control of an industrial hydraulic machine,”IEEE Conference on Decision & Control, Vol. 1, 2003.
DOI: http://dx.doi.org/10.36039/AA022012002
Refbacks
- There are currently no refbacks.
This work is licensed under a Creative Commons Attribution 3.0 License.