Open Access Open Access  Restricted Access Subscription or Fee Access

Cardiac Monitoring Device for Patient Health Care Using Wireless Technology

R. Rasika, R. Sankar

Abstract


Cardiac Monitoring is most important for people in their life. Cardiac monitoring device is implemented to monitor the patient health everyday. The cardiac monitoring device is designed through the connectivity of Bluetooth, ZIGBEE, GSM. The alarm sound is send to a doctor when the patient is serious. The Blood pressure, ECG, is displayed on the Smartphone, doctor computer. Concern App is installed to the Smartphone to view a heart rate and the current condition of the patient and the doctor can viewed the regular updates of the patient health.  The ZIGBEE is used to transfer the data between the device and Smartphone. The information of the patient can be gathered and stored in cloud and it can be retrived. If the Smartphone is away from the radius GPRS is used to transfer the data. The heart rate is displayed to the relative and doctor. When the patient is in serious condition the appointment is fixed to the nearear hospital. If the patient is in serious condition, use GPRS if you send the information to the nearest hospital and the immediate steps should be taken by the hospital before the patient arrive.


Keywords


Heart Rate, Bluetooth, Smartphone, GPRS, ZIGBEE, Blood Pressure, ECG, Microcontroller.

Full Text:

PDF

References


Justin Turner, Chase Zellner, Tareq Khan, Kumar Yelamarthi, School of Engineering and Technology central Michigan University, USA ”Continuous heart rate monitoring using smartphone” volume(2017).

Alvin L.Valor, Mary Regina B. Apsay, James Russell M.Alebo, Arfel Aguilar, Christine Joy B. Onquit, Marissa G. Gua. “Heart Saver: A Heart Rate Monitoring System with SMS Notification” 2016 IEEE conference on system, process and control (ICJPC 2016).

Ridza AZri Ramlee, Mohd Azlshah Bin Othman “Low cost heart Rate Monitoring Device using Bluetooth”. 2014 2nd International conference on information and communication Technology (ICOICT)

D.K Ratore, A.Upmanyu, and D. Lulla, “Wireless patient health monitoring system.” 2013Int.Conf.Signal Process. Communication. pp. 253-7, Dec.2013.

Amna Abdullah, AsmaIsmael, Aisha Rashid, Ali Abou-ElNour, and Mohammed Tarique, “Real Time Wireless Health Monitoring Application Using Mobile devices”, May 2015.

Oresko, Joseph J. Et al,” A Wearable Smartphone Based Platform for Real Time Cardiavascular Disease Detection Via Electrocardiagram Processing.” IEEE Transaction an Information Technology in Biomedicine, 2010.

A. Phyo, Z.Tunand , .Tun, “ Medical Patient Monitoring System using point to multi point Zinbee Technology”, June.2015.

https://www.researchgate.net/figure/illustation-of-a-remote-health-monitoring -system-based-on-wearable-sensor-health_fig1_269291229.

https://www.cookinghacks.com/documentation/tutorials/e-healt-biometric-sensor-plarformv2.0-arduino-rasberry-pi-medical application.

http://delinct.en.made-in-china.com

S.Reule and P.Drawz,”Heart Rate and Blood Pressure: Any Possible Implications for Management of Hypertension?”, National Institutes of Health,doi: 10.1007/s11906-012-0306,December 2013.

C.Malika,”A Multi-Alert Patient Health Monitoring using ZigBee” International Journal of Computer Application-Volume 83, No.17, ISSN 0975-8887, December 2013.

M. Sakari, “Modelling the Relationship between heart rate and features of vocal Frequency”, International journal of computer Application-volume 120.No.6, ISSN 0975-8887, December 2013.

A. Phyo, Z.Tunand, H.Tun, “Wireless Patient Monitoring System Using Point-To-Multi-Point ZigBee Technology”, International Journal of scientific & Technology Research.

C. Hiroshi, M. Atsuiko, K. Minoru, F. Fujiara, H. Toshihiro. A. Tanaka, and T. Tanaka, “A study on Heart rate Monitoring in Daily Life”, SICE journal of control, Measurement, and system Integration-Volume 8, No.1, January 2015.

W.Y. Shi and J.-C. Chiao Department of Electrical Engineering The University of Texas at Arlington Arlington, TX, 76019, “Neural Network Based Real-time HeartSound Monitor Using a Wireless Wearable Wrist Sensor” USA wenyuan.shi@mavs.uta.edu.

Bandana Mallick1 Ajit Kumar Patro2 “HEART RATE MONITORING SYSTEM USING FINGER TIP THROUGH ARDUINO AND PROCESSING SOFTWARE” Department of Electronics & Communication Engineering , GIET, Gunupur, Odisha, India.

Souvik Das “The Development of a Microcontroller Based Low Cost Heart Rate Counter for Health Care Systems” International Journal of Engineering Trends and Technology- Volume4 Issue2- 2013.

Embedded Lab. Introducing Easy Pulse: A DIY photoplethysmographic sensor for measuring heart rate. http://embedded-lab.com/blog/?p=5508, 2012.

Rakhi Joshi, V. V. Shete, S. B. Somani” Android Based Smart Learning and Attendance Management System” PG Student, Department of E&TC, MIT College of Engineering, Pune, India.

“Wireless Heart Rate Monitoring System using MQTT” Komkrit Chooruanga, Pongpat Mangkalakeereea 2016 International Electrical Engineering Congress, iEECON2016, 2-4 March 2016, Chiang Mai, Thailand.

D. L. Larkai and W. Ruiheng, "Wireless Heart Rate Monitor in Personal Emergency Response System," in Design and Diagnostics of Electronic Circuits & Systems (DDECS), 2015 IEEE 18th International Symposium on, 2015, pp. 299-300.

L. Tae-Soo, H. Joo-Hyun, and C. Myeong-Chan, "Biomedical Digital Assistant for Ubiquitous Healthcare," in Engineering in Medicine and Biology Society, 2007. EMBS 2007. 29th Annual International Conference of the IEEE, 2007, pp. 1790-1793.

N. H. Mahmood, N. Uyop, N. Zulkarnain, F. K. C. Harun, M. F. Kamarudin, and A. Linoby, "LED indicator for heart rate monitoring system in sport application," in Signal Processing and its Applications, 2011 IEEE 7th International Colloquium on, 2011, pp. 64-66.

N. S. A. Zulkifli, F. K. C. Harun, and N. S. Azahar, "XBee wireless sensor networks for Heart Rate Monitoring in sport training," in Biomedical Engineering (ICoBE), 2012 International Conference on, 2012, pp. 441-444.


Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution 3.0 License.