Auto Load Sharing of Diesel Generators using Micro-Controller
Abstract
The auto load refers to the automated power
management system employing diesel generator sets. The generators will be turned ON depending on the load it has to run during peak and off peak hours. These systems may be employed anywhere from residential building to malls. The system is controlled by microcontroller. The system also monitors current and temperature. The microcontroller takes in digital inputs from field instruments and provides various control signals as the output depending upon the logic that has been programmed into it. The generators are operated in alternate fashion. Additionally a temperature sensor is provided that helps the transformer to shut down when it exceeds thetemperature limit and there by protects the transformer.
Full Text:
PDFReferences
B. Bekiarov and A. Emadi, “A new on-line single-phase to three-phase
UPS topology with reduced number of switches,” Power Electronics
Specialist Conference, PESC '03, IEEE 34th Annual, 07/2003, pp.451-
vol.1.
http://datasheetcatalog.org/datasheet/SGSThomsonMicroelectronics/mX
xuyw
Belvedere, B.; Bianchi, M.; Borghetti, A.; Paolone, M.; “A
microcontroller-based automatic scheduling system for residential
microgrids” PowerTech, 2009 IEEE Bucharest
Singh, B.; Solanki, J.; Dept. of Electr. Eng., Indian Inst. of Technol.,
New Delhi “Load Compensation for Diesel Generator Based Isolated
Generation System Employing DSTATCOM” Power Electronics, Drives
and Energy Systems, 2006. PEDES '06. International Conference on 0-
-9772-X 15dec 2006
Refbacks
- There are currently no refbacks.
This work is licensed under a Creative Commons Attribution 3.0 License.