Open Access Open Access  Restricted Access Subscription or Fee Access

A ZVS Boost Converter with DC Motor Load

S. Kesavan, B. Ramraj

Abstract


A zero-voltage-switching (ZVS) Boost converter with
DC motor load is proposed. It consists of a ZVS boost converter stage and a ZVS half-bridge converter stage and two stages are merged into a single stage. The ZVS boost converter stage provides a continuous input current and ZVS operation of the power switches. The ZVS half-bridge converter stage provides a high voltage gain in DC Motor Load. The principle of operation and system analysis are presented. Theoretical analysis of the proposed converter wer verified on a Matlab Simulation using operating at 108 kHz switching frequency.


Keywords


Zero-Voltage Switching (ZVS), DC Motor Load Boost Converter, Coupled Inductor, High Voltage Gain, Reverse Recovery.

Full Text:

PDF

References


H-L.Do, “A Zero Voltage Switching DC-DC converter with high

voltage gain .” IEEE Trans. Power Electron., vol. 26, no. 5, May 2011.

R. J. Wai, W. H. Wang, and C. Y. Lin, “High-performance stand-alone

photovoltaic generation system,” IEEE Trans. Ind. Electron., vol. 55,

no. 1, pp. 240–250, Jan. 2008.

R. J. Wai and W. H. Wang, “Grid-connected photovoltaic generation

sys- tem,” IEEE Trans. Circuits Syst. I, Reg. Papers, vol. 55, no. 3, pp.

–964, Apr. 2008.

R. J. Wai, C. Y. Lin, C. Y. Lin, R. Y. Duan, and Y. R. Chang, “Highefficiency

power conversion system for kilowatt-level distributed generation

unit with low input voltage,” IEEE Trans. Ind. Electron., vol. 55,

no. 10, pp. 3702–3714, Oct. 2008.

S. K. Mazumder, R. K. Burra, and K. Acharya, “A ripple-mitigating and

energy-efficient fuel cell power-conditioning system,” IEEE Trans.

Power Electron., vol. 22, no. 4, pp. 1437–1452, Jul. 2007.

K. Kobayashi, H. Matsuo, and Y. Sekine, “Novel solar-cell power

supply system using a multiple-input DC–DC converter,” IEEE Trans.

Ind. Electron., vol. 53, no. 1, pp. 281–286, Feb. 2006.

Q. Zhao, F. Tao, F. C. Lee, P. Xu, and J. Wei, “A simple and effective to

alleviate the rectifier reverse-recovery problem in continuous-currentmode

boost converter,” IEEE Power Electron., vol. 16, no. 5, pp. 649–

, Sep. 2001.

Q. Zhao and F. C. Lee, “High-efficiency, high step-up dc–dc

converters,” IEEE Power Electron., vol. 18, no. 1, pp. 65–73, Jan. 2003.

Q. Zhao, F. Tao, Y. Hu, and F. C. Lee, “Active-clamp DC/DC converter

using magnetic switches,” in Proc. IEEE Appl. Power Electron.

Conf.,2001, pp. 946–952.

D. A. Grant, Y. Darroman, and J. Suter, “Synthesis of tapped-inductor

switched-mode converters,” IEEE Trans. Power Electron., vol. 22, no. 5,

pp. 1964–1969, Sep. 2007.

K. I. Hwu and Y. T. Yau, “Voltage-boosting converter on charge pump

and coupling inductor with passive voltage clamping,” IEEE Trans. Ind.

Electron., vol. 57, no. 5, pp. 1719–1727, May 2010.

S. V. Araujo, R. P. Torrico-Bascope, and G. V. Torrico-Bascope,

“Highly efficient high step-up converter for fuel-cell power processing

based on three-state commutation cell,” IEEE Trans. Ind. Electron., vol.

, no. 6, pp. 1987–1997, Jun. 2010.

C.-T. Pan and C.-M. Lai, “A high-efficiency high step-up converter with

low switch voltage stress for fuel-cell system applications,” IEEE Trans.

Ind. Electron., vol. 57, no. 6, pp. 1998–2006, Jun. 2010.

S.-K. Changchien, T.–J. Liang, J.-F. Chen, and L.-S. Yang, “Novel high

step-up DC-DC converter for fuel cell energy conversion system,” IEEE

Trans. Ind. Electron., vol. 57, no. 6, pp. 2007–2017, Jun. 2010.

H. Cheng, K. M. Smedley, and A. Abramovitz, “A wide-input-wideoutput

(WIWO) DC-DC converter,” IEEE Trans. Power Electron., vol.

, no. 2, pp. 280–289, Feb. 2010.

S. Park and S. Choi, “Soft-switched CCM boost converters with high

voltage gain for high-power applications,” IEEE Trans. Power

Electron.,vol. 25, no. 5, pp. 1211–1217, May 2010.

E.-H. Kim and B.-H. Kwon, “Zero-voltage- and zero-current-switching

full-bridge converter with secondary resonance,” IEEE Trans. Ind. Electron.,

vol. 57, no. 3, pp. 1017–1025, Mar. 2010.

H.-J. Chiu, Y.-K. Lo, H.-C. Lee, S.-J. Cheng, Y.-C. Yan, C.-Y. Lin, T.-

H. Wang, and S.-C. Mou, “A single-stage soft-switching flyback converter

for power-factor-correction applications,” IEEE Trans. Ind. Electron.,

vol. 57, no. 6, pp. 2187–2190, Jun. 2010.

E. Adib and H. Farzanehfard, “Zero-voltage-transition PWM converters

with synchronous rectifiers,” IEEE Trans. Power Electron., vol. 25, no.

, pp. 105–110, Jan. 2010.

X. Li and A. K. S. Bhat, “Analysis and design of high-frequency isolated

dual-bridge series resonant DC/DC converter,” IEEE Trans. Power

Electron., vol. 25, no. 4, pp. 850–862, Apr. 2010.

H.-L. Do, “A soft-switching DC/DC converter with high voltage

gain,”IEEE Trans. Power Electron., vol. 25, no. 5, pp. 1193–1200, May

K.-B. Park, C.-E. Kim, G.-W. Moon, and M.-J. Youn, “Three-switch

active-clamp forward converter with low switch voltage stress and wide

ZVS range for high-input-voltage applications,” IEEE Trans. Power

Electron., vol. 25, no. 4, pp. 889–898, Apr. 2010.


Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution 3.0 License.