Email this article 
Open Access
Subscription or Fee Access
Crack Detection Using Image Processing Algorithm in MATLAB
Abstract
Welding structures are nowadays used in many applications such as machineries in industry and in the form of bridges in civil structures. Crack in those structures results in loss of structural integrity which reduces a efficiency of a system in which the structure is used. Hence crack detection of a structure before implementation is important to reduce a defect. Here adaptive changing and morphology is used to detect a crack in structures.
References
P. Rettenmeier, E. Roos and S. Weihe, “Fatigue analysis of multiaxially loaded crane runway structures including welding residual stress effects,”Int.J.Fatigue, vol.82, no.2, pp.179-187, 2016.
S.A.Keo,D.Defer,F.Breaban, and F.Brachelet, ”Comparision between microwave infrared thermography and CO2 laser infrared thermography in defect detection in applications with CFRP,”Materials Sciences and applications ,vol.4,no.10,pp.600-605,2013.
A.Foudazi,M.T.Ghasr, and K.M.Donell, ”Active microwave thermography for defect detection of CFRP-stregthened cement-based materials,”IEEE Trans.Instrum.Meas., vol.64,no.9,pp.2583-2585,2015.
B.Yang,Y.Huang,and L.Cheng,”Defect detection and evaluation of ultrasonic infrared thermography for aerospace CFRP composites,”Infrared physics and technology,vol.60,no.60,pp.166-173,2013.
B.Gao,L.Bai,W.L.Woo,G.Y.Tian, and Y.Cheng,”Automatic defect identification of eddy current pulsed thermography using single channel blind source separation,”IEEE Trans.Instrum.Meas.,vol.63,no.4,pp.913-922,2014.
J.F.Florez-Ospina and H.D Benitez,”From local to glogal analysis of defect detectability in infrared non-destructive testing,”Infrared physics and Technology, vol.63, no.2, pp.211-221, 2014.
S.M.Shepard, J.R.Lhota,B.A.Rubadeux,D.Wang and T.Ahmed,”Reconstruction and enhancement of active thermographic image sequences,”Optical Eng.,vol.42, no.5,pp.1337-1342,2003.
Q.Tang,C.Bu,Y.Liu,L.Qi and Z.Yu,”A new signal processing algorithm of pulsed infrared thermography,”Infrared physics and technology,vol.68,pp.173-178,2015.
K.Chatterjee and S.Tuli,”Image enhancement in transient lock-in thermography through time series reconstruction and spatial slope correction,”IEEE Trans.Instrum.Meas., vol.61, no.4, pp.1079-1089, 2012.
A.R.AlQubaa,G.Y.Tian,J.Wilson,W.L.Woo and S.S.Dlay,”Feature extraction using normalized cross correlation for pulsed eddy current thermographic images,”Meas.Sci.and technology,vol.21,no.11,pp.1-11,2010.
L.Bai,S.Tian,Y.Cheng,G.Y.Tian,Y.chen and K.Chen,”Reducing the effect of surface emissivity variation in eddy current pulsed thermography,”IEEE SensorsJ.,vol.14,no.4,pp.1137-1142,2014.
Ph.P.Dracis,C.N.McCowan,J.D.McColeskey and R.Fields,”Crack tip opening and measurement through a girth weld in an X100 steel pipeline section,”Fatigue and Fracture of Eng.Materials and Structures,vol.31,no.12,pp.1065-1078,2008.
M.Pan,Y.He and L.Chen,eddy current thermography non-destructive testing,Beijing,china:National Defense Industry press,pp.24-26,2013.
Q.Shi and K.Wu,”Image segmentation algorithm for wheel set measuring based on region growing,”in proc.2011 Int .Conf. Optical instruments and technology: Optoelectronic imaging and processing technology, vol.8200:82000Y. Pp.1-7, 2011.
Refbacks
- There are currently no refbacks.
This work is licensed under a Creative Commons Attribution 3.0 License.