Open Access Open Access  Restricted Access Subscription or Fee Access

Design and Development of an Impeller of a Blower through Engineering Integration

Sachin C. Kulkarni, Sachin Mastud

Abstract


This paper deals with a need to develop and maintain complex design procedures by integrating design and modeling software. Through this integration data can be easily transferred through various development applications. In this work, importance of integration has been highlighted by integrating MathCAD and Pro-Engineer softwares for design and development of impeller of a blower. MathCAD is a standardized & right tool for engineering calculations while ProEngineer is a parametric, integrated 3D CAD/CAM/CAE solution. For overall pressure ratio (ξ) value of more than 2, forward (radial) impeller is suitable while backward curved impeller is more suitable for ξ less than 2. After implementation of this system, it is easily possible to optimize the design parameter based on the modified requirements. Also, new manufacturing drawings along with a bill of materials can be generated which helps to reduce the design cycle time.

Keywords


Designing and Modeling Software Integrations

Full Text:

PDF

References


www.ptc.com

www.vorton.com

Austin Church and Lobonoff, Austin Church and Lobo off, INDUSTRIAL BLOWERS by John Wiley and sons, Inc., New York. London. Sydney.

A.J.Stepanoff, PUMPS AND BLOWERS, Ingersoll-rand Company, John Wiley and sons, Inc. New York. London. Sydney

Val S Lobanoff and Robert R Ross, Centrifugal Pump- Hydraulic Design and Application

Fan Engineering, Buffalo Forge Company.

M.H.Annaiah, Design of Machine Elements-II, New Age International Publishers.

Design data Handbook, PSG College of Technology, Coimbatore.

Manufacturing Catalogue:

Manufacturing Catalogue of CB Doctor Ventilators Pvt. Ltd. Ahmedabad, India.

Manufacturing Catalogue of Batliboi Environmental Engineering Ltd. Gowandi, Mumbai, India.

Manufacturing Catalogue of Fevi International Z.I BEAUSOLEIL, 14290 LA VESPIERE

Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science , Sage Publications, “Modeling of spur gear mesh stiffness and static transmission error”

ZHANG Li, LIU Jia-wei, “Confirming and Analyzing Size Parameters of Cam Mechanism by MathCAD”, (College of Mechanical & Material Engineering, China Three Gorges.

Prof. Dr. Eng. Vistrian Maties, Cluj-Napoca, (2005), “Contributions to the Modeling, Simulation and Experimentation of Worm-Face Gear Drives With Localized Contact”, Technical University of Cluj-Napoca Faculty of Mechanics Department of Mechanism, Fine mechanics and Mechatronics.

Sachin Kulkarni, Sachin Mastud, (March 2011), “Design of a Spur gear through Parametric Modeling Approach” in „Sabbatical‟, National Conference on Recent Trends in Manufacturing, , Solapur,MS, India.

Sachin Kulkarni, Sachin Mastud, (April 2011), “Design of a Blower through Engineering Integrationh” in „ICATE‟, International Conference on Recent Trends in Manufacturing, , Nagapattinam,Tamilnadu, India.

Y.B. Lee and C.H. Kim, Korea Institute of Science and Technology, Seoul, Korea, S. Y. Ahn, Y. M. Choi and B.K. Ahn, Advanced Technology Department ,Huyndai MOBIS, Justin Oh ,MEEREX, Taejon, Republic of Korea , “Turbo Blower for 80 kW Proton Exchange Membrane Fuel Cell Vehicle” Proceedings of the 5th WSEAS Int. Conf. on Power Systems and Electromagnetic Compatibility, Corfu, Greece, August 23-25, 2005 (pp182-187)

MingYao Ding,ANSYS, Inc.,Clinton Groth, University of Toronto Institute for Aerospace Studies, Suresh Kacker, Pratt and Whitney Canada, Douglas Roberts,Pratt and Whitney Canada , CFD Analysis Of Off-Design Centrifugal Compressor Operation And Performance

Saifudin Hafiz Yahaya1 Mohd Shukor Salleh3 ,Faculty of Manufacturing Engineering University Teknikal Malaysia Melaka,Jamaludin Md. Ali School of Mathematical Sciences University Sains Malaysia, Penang, Malaysia , Spur Gear Design With An S-Shaped Transition Curve Application Using Mathematica And Cad Tools

William Brodhead & Thomas E. Hatton, High Vacuum, High Airflow Blower Testing and Design For Soil Vapor Intrusion Mitigation In Commercial Buildings

Claus Thorp Hansen and Asko Riitahuhta , Issues On The Development And Application Of Computer Tools To Support Product Structuring And Configuring

Paul Windrum, Lawrence Green, and KoenFrenken , The Role Of Design In Product Innovation: Design Ergonomics And The Development Of The Portable Computer

Structureworks, Llc 2005 © Structureworks,( September 2005) Llc Last Edited Version

Live Parametric Design Modifications In Cad-Linked Virtual Environment

Farzam Roknaldin,Applied Thermal Technologies Inc,3255 Kifer Road, Santa Clara, CA 95051, Ridvan Amir Sahan (1) Xiaohua Howard Sun (2), Fluent Incorporated, 3255 Kifer Road, Santa Clara, CA 95051, A Simplified CFD Model For The Radial Blower

Eng. Ileana Dacia Napau, Phd. Candidate, Contributions To The Modeling, Simulation And Experimentation Of Worm-Face Gear Drives With Localized Contact Doctoral Thesis Abstract, Technical University Of Cluj-Napoca Faculty Of Mechanics Department Of Mechanisms, Fine Mechanics And Mechatronics

Khin Cho Thin, Mya Mya Khaing, and Khin Maung Aye, Design And Performance Analysis Of Centrifugal Pump, World Academy Of Science, Engineering And Technology 46 2008

Ilya Grinberg, Electric Machines Project Activities Using Mathcad, Buffalo State College Carl Spezia, Southern Illinois University-Carbondale Herbert Hess, University of Idaho, American Society for Engineering Education, 2008

Pramesh Kumar, H.L.Tiwari, Dr. V. Prashad, Dr. V.K.Gahlot Design Of Francis Type Mixed Flow Pump Impeller Using C++ , Journal of Engineering Research and Studies E-ISSN 0976-7916 JERS/Vol.II/ Issue I/January-March 2011/37-48 Research Article

Dipl. Ing. R. Brignolo, Magneti-Marelli SpA; Dr. F. Cascio, Centro Ricerche Fiat; Torino; Prof. Dr. L. Console, Universita di Torino; Prof. Dr. P. Dague, Université de Paris Nord; Dipl. Ing. P. Dubois, Renault, Paris; Dr. O. Dressler, OCC‟M Software GmbH, München; Dipl. Ing. D. Millet, PSA Peugeot Citroën, Paris; Dipl. Ing. B. Rehfus,DaimlerChrysler AG, Stuttgart; Prof. Dr. P. Struss, Technische Universität München, Integration of Design and Diagnosis into a Common Process, Appeared in: Electronic Systems for vehicles, VDI Verlag, Duesseldorf, 2001. p.53 - 73

Adekunle Taofeek Oyelami, Olawale Oluwadare Olaniyan, Dalyop Iliya and Abimbola Samson Idowu , The Design of a Closed-Type-Impeller Blower for a 500kg Capacity Rotary Furnace, Engineering Materials Development Institute Akure, Ondo State, Nigeria, AU J.T. 12(1): 50-56 (Jul. 2008)




DOI: http://dx.doi.org/10.36039/AA082011018

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution 3.0 License.