Email this article 
Open Access
Subscription or Fee Access
Mitigation of Harmonic for an Arc Welding Machine by using Shunt Active Filter
Abstract
This paper introduces a design and simulation of an adaptive shunt active filter (SAF) for harmonic mitigation of an arc welding machine. This type of welding machines causes unacceptable current distortions in the utility electrical distribution system, especially when an adjacent manufacturing facility with extensive electronic controls exists. This work demonstrates effective use of active low-pass filter with the pulse width modulator PWM carrier strategy to control the current of active filter. The method is based on frequency domain. A model of a typical power system coupled with arc welding machine is presented. The active filter are implemented in power electronic simulation software, representative waveforms and spectral analysis is presented, simulation results show that the proposed active filter is very effective in harmonic elimination of an arc welding machine.
Keywords
References
P. Ankita, M. Amita.: Mitigation of Harmonic in Inverter. In: International organization of Scientific Research Journal of Engineering IOSRJEN, Sep. , Vol. 2,2012, PP.98-105.
K...S. Manish, Nisheet S.:Review of Causes and Effect of Harmonics on Power System. In:International Journal of Science, Engineering and Technology Research IJSETR, Feb., Vol. 3, 2014, pp. 214 - 220.
S. Jawad: Power Electronics for Resistance Spot Welding Equipment. M.S. Thesis, chapter 2. In: Dept. Infor. Tech. And Media, Mid Sweden University, Sweden, 2012, pp. 13-20.
S. Nikunj: Harmonics in power systems - Causes, effects and control. In: Siemens Industry Co., USA, May 2013.
M. B. Thomas, J. C. Daniel.: Application of IEEE Std 519-1992 Harmonic Limits. Pulp and Paper In: Industry Technical Conference PPIC, Jun. 18-23, 2006, pp. 1-9.
H. Tony, D. Kurt, C. Matt:Interpreting IEEE Std 519 and Meeting its Harmonic Limits in VFD Applications. In:Petroleum and Chemical Industry Conference PCIC, Sep. 2003, pp. 145-150.
S. K Purushothaman.: A quantitative approach to minimize harmonics elimination using filter design. In: International Journal of Advanced Research in Computer Science and Software Engineering IJARCSSE, Dec.2013, Vol.3. pp. 568- 572.
Kuldeep K., Squib S., Anand V.: Harmonics and mitigation technique by passive shunt filter. In:International Journal of Soft Computing and Engineering IJSCE , May, Vol. 3, 2013, pp. 325-331.
P. Mihaela, Alexandru B., Mircea D.: Case Study Survey of Harmonic Pollution Generated by Railway Systems and Filtering Solutions. In: 12th wseas International Conference on systems, Heraklion, Greece, Jul. 22-24, 2008, pp.110-115.
J.Chelladurai, G. Saravana Ilango, C Nagamani., et al.:Investigation of Various PWM Techniques for Shunt Active Filter.In: International Scholarly and Scientific Research and Innovation, Vol. 2, 2008, pp. 150-156.
E.Gaber, A EL-Noby, A. Mohamed.: Design and Simulation of Shunt Active Filter for Assiut Cement Company DC Motor Drive. In: Faculty of Engineering, Assiut University, Egypt, 2013 pp. 2244 - 2259.
M. Ahmed: Analysis and Simulation of Shunt Active Power Filter for Harmonic Cancellation of Non Linear Loads. In:Engineering and Technology Journal, Electrical and Electronic Engineering Department, University of Technology, Baghdad, 2010 ,Vol.28, pp. 5188 -5199.
J. Thomas Dionise, Visuth Lorch. : Harmonic Analysis of a Mid-Frequency Welder Application for a Metal Working Facility. In: IEEE, Edmonton, Alta, 2008, PP. 1-6.
E.George, E.Joseph and et al.: Harmonic Emission Llimits and Selecting PCC Location Based on the Type of Distribution System. In: World Congress on Engineering, London, U.K, Vol.I, 2014.
Z. E Mohamed. Power system harmonic filters. book, Chapter 1,In: Assiut, Egypt, 2007.
DOI: http://dx.doi.org/10.36039/AA052015002.
Refbacks
- There are currently no refbacks.
This work is licensed under a Creative Commons Attribution 3.0 License.